The biomechanical effect of different posterior tibial slopes on the tibiofemoral joint after posterior-stabilized total knee arthroplasty
Yingpeng Wang,1,2 Songhua Yan,1,2 Jizhou Zeng,corresponding author3 and Kuan Zhangcorresponding author1,2Knee
Background
Different posterior tibial slopes (PTS) after posterior-stabilized total knee arthroplasty (PS-TKA) may lead to different biomechanical characteristics of knee joint. This cadaveric study was designed to investigate the tibiofemoral kinematics and contact pressures after PS-TKA with different PTS.
Methods
Nine human cadaveric knee specimens were used for PS-TKA with the PTS of 3°, 6°, and 9°. The tibiofemoral kinematics and contact pressures were measured during knee flexion angle changing from 0 to 120° (with an increment of 10°) with an axial load of 1000 N at each angle.
Results
The root mean square (RMS) of the tibiofemoral contact area and the mean and peak contact pressures during knee flexion were 586.2 mm2, 1.85 MPa, and 5.39 MPa before TKA and changed to 130.2 mm2, 7.56 MPa, and 17.98 MPa after TKA, respectively. Larger contact area and smaller mean and peak contact pressures were found in the joints with the larger PTS after TKA. The RMS differences of femoral rotation before and after TKA were more than 9.9°. The posterior translation of the lateral condyle with larger PTS was more than that with smaller PTS, while overall, the RMS differences before and after TKA were more than 11.4 mm.
Conclusion
After TKA, the tibiofemoral contact area is reduced, and the contact pressure is increased greatly. Approximately 80% of the femoral rotation is lost, and only about 60% of the femoral translation of lateral condyle is recovered. TKA with larger PTS results in more posterior femoral translation, larger contact area, and smaller contact pressure, indicating that with caution, it may be beneficial to properly increase PTS for PS-TKA.
Link to article