Morphometric Examination of Straight, Tapered Titanium Stems A Retrieval Study

Cementless straight, tapered rectangular cross section titanium stems have been used by the senior author since 1979. Thirty-four stems retrieved postmortem, after between 10 days and 15.2 years in situ, were studied morphometrically and histologically. Nineteen stems were first generation (1979–1986), with an incomplete sagittal taper and a mean surface roughness of 1 μm (Ra 1.23 ± 0.3 μm); 15 stems were second generation after 1986, with a full biplane taper and a mean surface roughness of 4 μm (Ra 4.14 ± 0.36 μm). Implant surface bony coverage was determined morphometrically in 10 segments of the stems, and expressed as a bone implant contact index. Histologically, there were no differences between implants with different levels of roughness. Morphometrically, the firstgeneration stems showed significant differences in coverage (distal > proximal); second-generation stems had a more uniform pattern. Stems retrieved early after arthroplasty had a mean bone implant contact index of 10%. The mean bone implant contact index showed attainment of maximum coverage by 5 years after arthroplasty, without additional apposition or loss thereafter. Patients younger than 65 years at arthroplasty had similar bone implant contact indices to patients 65 years or older; coverage in the six patients 80 years of age at retrieval did not differ from the rates in the other patients. Morphometry was able to provide objective evidence of design change effects. No differences in coverage were found in terms of times in situ, patient age at arthroplasty and at retrieval, and degree of stem surface roughness.